|
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel® Xeon® processor E3-1200v5 quad core processor family is designed to deliver the best combination of performance, built-in capabilities, and cost-effectiveness. The product also supports Intel® Pentium® and Intel® Core-i3 dual core processors. Choose one of the following processors based on the model:
|
|
|
|
Processor
One of the following depending on model
|
|
Model
|
CPU frequency
|
Cores
|
L3 Cache
|
Power
|
DDR4 Hz
|
|
G4400
|
3.3GHz
|
2
|
3MB
|
54W
|
2133
|
|
G4500
|
3.5GHz
|
2
|
3MB
|
51W
|
2133
|
|
i3-6100
|
3.7GHz
|
2
|
3MB
|
51W
|
2133
|
|
i3-6300
|
3.8GHz
|
2
|
4MB
|
51W
|
2133
|
|
E3-1220v5
|
3.0GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1225v5
|
3.3GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1230v5
|
3.4GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1240v5
|
3.5GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1270v5
|
3.6GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1280v5
|
3.7GHz
|
4
|
8MB
|
80W
|
2133
|
|
E3-1240Lv5
|
2.1GHz
|
4
|
8MB
|
25W
|
2133
|
|
E3-1260Lv5
|
2.9GHz
|
4
|
8MB
|
45W
|
2133
|
|
|
|
|
|
|
|
On System Management Chipset
|
|
HPE iLO (Firmware HPE iLO4 2.3) 4GB NAND
NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the iLO QuickSpecs.
|
|
|
|
|
|
|
Memory
|
Type:
|
DDR4 Unbuffered (UDIMM)
|
|
|
Unbuffered (UDIMM)
|
|
|
DIMM Slots Available
|
4
|
4 DIMM slots per processor; 2 channels per processor, 2 DIMMs per channel
|
|
Maximum Capacity (UDIMM)
|
64GB
|
(4 x 16GB UDIMM @2133MHz)
|
|
|
|
|
|
|
|
Memory Protection
One of the following depending on model
|
|
|
|
|
|
Network Controller
|
|
HPE Ethernet 1Gb 2-port 332i network Adapter or BCM5720.
The HPE ProLiant DL20 Gen9 server offers the customer a dual-port NIC standard with the option to upgrade with a variety of networking options.
|
|
|
|
|
|
Expansion Slots
|
|
Dual side Low profile riser
|
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Form Factor
|
Notes
|
|
1
|
PCIe 3.0
|
x8
|
x8
|
|
Half length/half height
|
|
|
2
|
PCIe 3.0
|
x8
|
x8
|
|
Half length/full height
|
|
|
NOTE: Bus Width data indicates the number of physical electrical lanes running to the connector.
|
|
|
|
FlexibleLOM Riser
|
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
|
1
|
Flexible LOM
|
x8
|
x8
|
|
|
Half length/half height
|
|
|
2
|
PCIe 3.0
|
x8
|
x8
|
|
|
Half length/full height
|
|
|
NOTE: This riser is mandatory for installing FlexibleLOMs.
|
|
|
GPU Riser
|
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
|
1
|
|
|
|
|
|
|
|
|
2
|
PCIe 3.0
|
x16
|
x16
|
|
|
Half length/full height
|
|
|
|
|
|
NOTE: It is mandatory to choose one of the above risers.
|
|
|
Storage Controller
One of the following depending on model
|
|
Entry Models
|
|
HPE Dynamic Smart Array B140i Controller
|
|
|
|
Base Models
|
|
HPE Dynamic Smart Array B140i Controller
|
|
|
|
Performance Models
|
|
HPE H240 FIO Smart Host Bus Adapter
|
|
|
NOTE: B140i provides support for up to 4 SATA drives, data transmission speeds up to 6Gb/s and supports RAID 0, 1 & 5 on DL20 Gen9.
NOTE: H240 provides support for up to 4 SAS/SATA drives, data transmission speeds up to 12Gb/s and supports RAID 0, 1 & 5 on DL20 Gen9.
NOTE: DL20 Gen9 also supports other controller options like P440; read additional option to know more.
|
|
|
|
|
Internal Storage Devices
One of the following depending on model
|
|
Optical Drives
|
|
Optional: DVD-ROM, DVD-RW
|
|
|
Hard Drives
|
|
|
Hard Drive Bays
|
|
4 SFF drive bays total with Optical Bay
|
|
2 LFF drive bays total with Optical Bay
NOTE: HPE ProLiant DL20 Gen9 server offers Hot plug LFF, Non hot plug LFF and SFF versions in CTO. The Optical Drive bay is available with both models.
NOTE: Drive cage changes are not supported.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 654961-B21: HPE SFF Gen9 Hard Drive Blank Kit or P/N 689745-B21: HPE LFF Gen9 Hard Drive Blank Kit or P/N 654963-B21: HPE LFF Gen9 Hard Drive Blank kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
|
|
|
|
|
|
|
Maximum Internal Storage
One of the following depending on model
|
|
|
CAPACITY
|
CONFIGURATION
|
|
Hot Plug SFF SAS
|
8TB
|
4 x 2TB
|
|
Hot Plug SFF SATA
|
8TB
|
4 x 2TB
|
|
Hot Plug LFF SAS
|
16TB
|
2 x 8TB
|
|
Hot Plug LFF SATA
|
20TB
|
2 x 10TB
|
|
Hot Plug SFF SAS SSD
|
15.36TB
|
4 x 3.84TB
|
|
Hot Plug SFF SATA SSD
|
15.36TB
|
4 x 3.84TB
|
|
Hot Plug LFF SATA SSD
|
15.36TB
|
4 x 3.84TB
|
|
Non Hot Plug LFF SATA
|
8TB
|
2 x 4TB
|
|
|
|
|
|
Power Supply
One of the following depending on model
|
|
HPE 290W FIO Power Supply
|
|
HPE 900W AC 240V DC Redundant Power Supply
NOTE: HPE 900W Redundant Power Supply supports100VAC to 240VAC and also supports 240VDC.
|
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. The above mentioned Entry-Level power supply options have been designed specifically for HPE ProLiant DL20 Gen9 Server.
The HPE 290W FIO Power Supply is the standard, non-redundant AC power supply with 80Plus Silver Certification. It features 92% power efficiency with a set of features optimized for the DL20 Gen9 rack server.
The HPE 900W Gold (Redundant) AC/240V DC Power Input Module with Power Backplane can be configured to support power redundancy in ProLiant servers that offer only a single power supply bay, providing additional protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce operating expenses while protecting against trapped power capacity in the data center. The power backplane option can support up to two (2) hot-plug AC power input modules. This Redundant power supply option is only supported on DL20 Gen9 SFF chassis model.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page located athttp://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/options/power-cable.html
To review the power requirements for your selected system, please use the HPE Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
|
|
|
|
|
System Fans
One of the following depending on model
|
|
|
Non-redundant
|
Redundant
|
|
1P model
|
3 fans
|
NA
|
NOTE: DL20 has 3 fans,2 front fan assemblies and 1 center fan assembly which ship standard,
non-redundant.
|
|
|
|
|
|
Interfaces
|
|
Video
|
1 rear video connector
|
|
|
USB
|
5 USB ports (standard)
Front: 2xUSB 2.0
Rear: 2xUSB 3.0
Internal: 1x USB 3.0
|
|
|
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
|
|
LOM Network Ports
|
2x1GbE ports
|
NOTE: Customers can upgrade to next generation network (10 GbE) by installing a FlexibleLOM riser.
|
|
|
|
|
|
|
|
Upgradeability
One of the following depending on model
|
|
FlexibleLOM connector for 1 Gigabit or 10 Gigabit networking options
|
|
Up to 4 DIMM slots available for higher memory capacity
|
|
Up to 4SFF Drive bays or 2LFF Drive bays
|
|
HPE Smart Array or Smart HBA Controller
|
|
Redundant Power Supply
NOTE: RPS is only compatible with DL20 SFF Chassis. Customer can upgrade from DL20 Gen9 on SFF chassis with 290W PSU to 900W redundant power supply
|
|
|
|
|
|
Industry Standard Compliance
|
|
UEFI (Unified Extensible Firmware Interface Forum)
|
|
PCIe 3.0 Compliant
|
|
PXE Support
|
|
WOL Support
|
|
Microsoft® Logo certifications
|
|
USB 3.0 Support
|
|
ASHRAE A3
NOTE: Refer to technical specifications section for more details.
|
|
|
|
|
|
Graphics
|
|
Integrated Matrox G200 video standard
On board graphics: Integrated Matrox G200 video standard
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
|
|
HPE NVIDIA Quadro K2200 GPU Module
NOTE: Install GPU riser option to support GPU card. A GPU enablement kit 811271-B21 is mandatory to support GPU.
|
|
|
|
|
|
HPE Server UEFI/Legacy ROM
|
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
·Secure Boot
·Operating system specific functionality
·Support for > 2.2 TB (using GPT) boot drives
·USB 3.0 Stack
·Embedded UEFI Shell
·Mass Configuration Deployment Tool using RESTful API for iLO 4
·PXE boot support for IPv6 networks
·Boot support for option cards that only support a UEFI option ROM
·Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen9 Server.
|
|
|
|
|
Form Factor
One of the following depending on model
|
1U Rack form factor
4SFF and 2LFF version:
1.70" (4.32cm) Height x 15.05" (38.22cm) Depth x 17.11" (43.46cm) Length
NOTE: Depth of the chassis is measured from rear to ear at 15.05". Depth from rear to bezel is 15.5".
|
|
|
|
|
Embedded Management
|
|
HPE Integrated Lights-Out
(HPE iLO)
|
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Not available on ML10 Gen9. Learn more athttp://www.hpe.com/info/ilo.
|
|
|
|
UEFI
|
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more athttp://www.hpe.com/servers/uefi.
|
|
|
|
RESTful API
|
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
|
|
|
|
Intelligent Provisioning
|
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning. Learn more athttp://www.hpe.com/servers/intelligentprovisioning.
|
|
|
|
Embedded Remote Support
|
The Hewlett Packard Enterprise embedded remote support, when used with Insight Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone home support. Learn more athttp://www.hpe.com/info/insightonline/explore.
|
NOTE: For more information, visit: http://www.hp.com/go/ilo or HPE iLO Management Engine technologies whitepaper.
|
|
|
|
|
|
Server utilities
|
|
Smart Update
|
Optimize firmware and driver updates with Smart Update solutions including Smart Update Manager (SUM) and Service Pack for ProLiant (SPP) and smart components. Learn more athttp://www.hpe.com/servers/smartupdatemanager.
|
|
|
|
HPE Systems Insight Manager (HPE SIM)
|
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/servers/hpsim.
|
|
|
|
Scripting Tool Kit and Windows PowerShell
|
Provision 1 to many servers using your own scripts to discover and deploy them with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more athttp://www.hpe.com/servers/proliant/stkorhttp://www.hpe.com/servers/powershell.
|
|
|
|
RESTful Interface Tool
|
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4 to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
|
|
|
|
HPE iLO Mobile Application
|
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit:http://www.hpe.com/info/ilo/mobileapp.
|
|
|
|
HPE Insight Online
|
HPE Insight Online, available at no additional cost as part of your Hewlett Packard Enterprise warranty, Care Pack or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hpe.com/info/insightonline/explore.
|
|
|
|
|
|
|
Security
|
|
Power-on password
|
|
Serial interface control
|
|
Administrator's password
|
|
TPM 1.2
|
|
TPM 2.0
|
|
APCI 2.0b
|
|
UEFI
|
|
|
|
|
|
Warranty
|
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
|
|
