|
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
|
|
|
Processor
One of the following depending on model
|
|
Model
|
CPU frequency
|
Cores
|
L3 Cache
|
Power
|
QPI
|
DDR4 Hz
|
|
E5-2660v3
|
2.6GHz
|
10
|
25MB
|
105W
|
9.6GT/s
|
2133
|
|
E5-2640v3
|
2.6GHz
|
8
|
20MB
|
90W
|
8.0GT/s
|
1866
|
|
E5-2630Lv3
|
1.8GHz
|
8
|
20MB
|
55W
|
8.0GT/s
|
1866
|
|
E5-2623v3
|
3.0GHz
|
4
|
10MB
|
105W
|
8.0GT/s
|
1866
|
|
E5-2620v3
|
2.4GHz
|
6
|
15MB
|
85W
|
8.0GT/s
|
1866
|
|
E5-2609v3
|
1.9GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
|
E5-2603v3
|
1.6GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1600
|
|
E5-1650v3
|
3.5GHz
|
6
|
15MB
|
140W
|
0.0GT/s
|
2133
|
|
E5-1603v3
|
2.8GHz
|
4
|
10MB
|
140W
|
0.0GT/s
|
1866
|
|
E5-1620v3
|
3.5GHz
|
4
|
10MB
|
140W
|
0.0GT/s
|
2133
|
|
E5-2660v4
|
2.0GHz
|
14
|
35MB
|
105W
|
9.6GT/s
|
2400
|
|
E5-2640v4
|
2.4GHz
|
10
|
25MB
|
90W
|
8.0GT/s
|
2133
|
|
E5-2630Lv4
|
1.8GHz
|
10
|
25MB
|
55W
|
8.0GT/s
|
2133
|
|
E5-2623v4
|
2.6GHz
|
4
|
10MB
|
85W
|
8.0GT/s
|
2133
|
|
E5-2620v4
|
2.1GHz
|
8
|
20MB
|
85W
|
8.0GT/s
|
2133
|
|
E5-2609v4
|
1.7GHz
|
8
|
20MB
|
85W
|
6.4GT/s
|
1866
|
|
E5-2603v4
|
1.7GHz
|
6
|
15MB
|
85W
|
6.4GT/s
|
1866
|
|
E5-1680v4
|
3.4GHz
|
8
|
20MB
|
140W
|
9.6GT/s
|
2400
|
|
E5-1660v4
|
3.2GHz
|
8
|
20MB
|
140W
|
9.6GT/s
|
2400
|
|
E5-1620v4
|
3.5GHz
|
4
|
10MB
|
140W
|
0.0GT/s
|
2400
|
|
E5-1607v4
|
3.1GHz
|
4
|
10MB
|
140W
|
0.0GT/s
|
2400
|
|
E5-1603v4
|
2.8GHz
|
4
|
10MB
|
140W
|
0.0GT/s
|
2400
|
NOTE: Up to 1 processor supported. Mixing different processor models is not supported.
|
|
|
Cache Memory
One of the following depending on model
|
|
10MB (1 x 10MB) Level 3 cache
NOTE: For Four-core processors.
|
|
15MB (1 x 15MB) Level 3 cache
NOTE: For Six-core processors.
|
|
20MB (1 x 20MB) Level 3 cache
NOTE: For Eight-core processors.
|
|
25MB (1 x 25MB) Level 3 cache
NOTE: For Ten-core processors.
|
|
30MB (1 x 30MB) Level 3 cache
NOTE: For Ten-core processors.
|
|
35MB (1 x 35MB) Level 3 cache
NOTE: For Fourteen-core processors.
|
|
|
|
|
Chipset
|
|
Intel® C610 Series Chipset
|
|
Intel® E5-2600v4 Processor Family
|
|
Intel® E5-2600v3 Processor Family
|
|
Intel® E5-1600v3 Processor Family
NOTE: This is a 140W processor which need to be ordered with the ML110 Gen9 System fan upgrade kit - 789654-B21.
|
NOTE: For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/
|
|
|
|
On System Management Chipset
|
|
HPE iLO (Firmware HPE iLO4 2.0 or later) 2GB NAND
NOTE: Read and learn more in the HPE iLO QuickSpecs.
|
|
|
|
|
|
Memory
|
Type:
|
HPE SmartMemory and Standard Memory
|
|
|
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
|
|
|
DIMM Slots Available
|
8
|
(8 DIMM slots per processor, 4 channels per processor, 2 DIMMs per channel)
|
|
Maximum Capacity (LRDIMM)
|
128GB
|
(8 x 16GB LRDIMM @2133MHz)
|
|
|
Maximum Capacity (RDIMM)
|
256GB
|
(8 x 32GB RDIMM @2133MHz)
|
|
|
NOTE: This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS installation.
|
|
|
|
Memory Protection
|
|
Advanced ECC
|
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
|
|
|
Online spare
|
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
|
|
|
|
|
|
Network Controller
|
|
Broadcom 5717C0 Dual-port 1Gb
|
|
|
|
|
Expansion Slots
|
| |
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Form Factor
|
Notes
|
|
5
|
PCIe 3.0
|
x8
|
x8
|
|
Full-height, half-length slot
|
For processor 1
|
|
4
|
PCIe 3.0
|
x4
|
x4
|
|
Full-height, half-length slot
|
For processor 1
|
|
3
|
PCIe 3.0
|
x8
|
x8
|
|
Full-height, half-length slot
|
For processor 1
|
|
2
|
PCIe 3.0
|
x4
|
x4
|
|
Full-height, half-length slot
|
For processor 1
|
|
1
|
PCIe 3.0
|
x16
|
x16
|
|
Full-height, ¾ length (up to 9.5") Slot
|
For processor 1
|
|
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
NOTE: Five total expansion PCIe 3.0 slots. One PCIe 3.0 x16 (x16 speed); Two PCIe 3.0 x 8 (x8 speed); Two PCIe 3.0 x 4 (x4 speed).
|
|
|
| |
|
Expansion Slots #
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Device Number
|
Form Factor
|
Notes
|
|
6
|
HPE ML Gen9 Dedicated iLO Port Kit
|
|
x1
|
|
|
Dedicate for ML Series
|
|
|
|
|
|
Storage Controller
One of the following depending on model
|
|
Entry Models
|
|
HPE Dynamic Smart Array B140i Controller
|
|
|
NOTE: B140i can't mix with any standup internal controller.
|
|
|
Base Models
|
|
HPE Dynamic Smart Array B140i Controller
|
|
|
NOTE: B140i can't mix with any standup internal controller.
|
|
|
|
|
|
Internal Storage Devices
One of the following depending on model
|
|
Optical Drive
|
|
Optional SATA 9.5mm DVD-ROM Optical Drive
|
|
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: Optical is optional in BTO models.
|
|
|
Hard Drives
|
|
|
Hard Drive Bays
|
|
Up to 4 Non-hot plug SATA 3.5" drives
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks installed. The 4LFF configurations includes 3 blanks and 8SFF includes 7 blanks. Additional hard drive blanks can be ordered using either P/N 666986-B21 for the HPE LFF HDD Blank Kit or P/N 666987-B21 for the HPE SFF HDD Blank Kit. These part numbers for single HDD blanks below are also provided should you require replacement HDD blanks for your server.
NOTE: NHP SATA is limited to B140i controller.
|
|
4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8
|
|
8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16
NOTE: 16SFF is limited to P840 controller.
NOTE: H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21.
NOTE: P840 16SFF require 2 cable kit P/N: 784608-B21.
|
|
|
|
|
|
Maximum Internal Storage
One of the following depending on model
|
|
|
CAPACITY
|
CONFIGURATION
|
|
Hot Plug LFF SAS
|
64TB
|
8x8TB
|
|
Hot Plug LFF SATA
|
80TB
|
8x10TB
|
|
Hot Plug SFF SAS
|
32TB
|
16x2TB
|
|
Hot Plug SFF SATA
|
32TB
|
16x2TB
|
|
Non Hot Plug LFF SATA
|
16TB
|
4x4TB
|
|
Hot Plug LFF SATA SSD
|
15.36TB
|
8x1.92TB
|
|
Hot Plug SFF SAS SSD
|
6.4TB
|
16x400GB
|
|
Hot Plug SFF SATA SSD
|
30.72TB
|
16x1.92TB
|
|
|
|
|
Power Supply
One of the following depending on model
|
|
HPE 350W ATX-Gen9 Power Supply FIO Kit
|
|
HPE 550W ATX-Gen9 Power Supply Kit
|
|
HPE 750W CS Gold Ht Plg Pwr Supply Kit
NOTE: The first 750W CS Gold Ht Plg Pwr Supply Kit requires the RPS Enablement Kit.
NOTE: The RPS Enablement kit will support two power supplies.
|
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been designed specifically for HPE ProLiant Gen9 Essential Series servers.
The HPE 550W FIO Power Supply is the standard, non-redundant AC power supply option for most HPE ProLiant Gen9 Essential servers. It features Silver-level (89%) certified power efficiency with a set of features optimized for the Gen9 Essential-series rack and tower servers.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
Power specifications and technical content for all HPE Server power supplies can be found athttp://www.hp.com/go/proliant/powersupply.
|
|
|
|
System Fans
One of the following depending on model
|
|
|
Non-redundant
|
Redundant
|
|
1P model
|
2 fans
|
NA
|
NOTE: One (1) Non-hot plug, non-redundant fan ships as standard.
|
|
|
|
|
Interfaces
|
|
|
|
Network RJ-45 (Ethernet)
|
2
|
|
|
HPE iLO Remote Management Network Port
|
1GbE Optional Port
|
|
|
Micro SD Slot
|
1 (internal)
|
NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro-SD card into the Micro-SD slot while the server is powered.
|
|
USB 3.0
|
5 (2 rear, 1 internal, 2 front )
|
|
|
USB 2.0
|
3 (2 rear, 1 internal)
|
|
|
|
|
|
|
|
Upgradeability
|
|
Up to 16 SFF Hard Drive Bays; Or 8 LFF Hard Drive Bays
|
|
Up to 8 DIMM slots
|
|
Redundant Power Supply
|
|
Optional optical drive (up to 1)
|
|
|
|
|
Industry Standard Compliance
|
|
ACPI 2.0b Compliant
|
|
PCIe 3.0 Compliant
|
|
PXE Support
|
|
WOL Support
|
|
Novell Certified
|
|
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
|
|
Microsoft® Logo certifications
|
|
USB 3.0 Support
|
|
SMBIOS 2.7.1
|
|
ASHRAE A3
|
|
|
|
|
Graphics
|
|
16 bit color: maximum resolution of 1920 x 1200
|
|
Integrated Matrox G200 video standard
|
|
32 bit color: maximum resolution of 1280 x 1024
• 16 MB Flash
• 128 MB DDR3
|
|
|
|
|
HPE Server UEFI/Legacy ROM
|
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
- Secure Boot
- Operating system specific functionality
- Support for > 2.2 TB (using GPT) boot drives
- USB 3.0 Stack
- Embedded UEFI Shell
- Mass Configuration Deployment Tool using RESTful API for iLO 4
- PXE boot support for IPv6 networks
- Boot support for option cards that only support a UEFI option ROM
- Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen9 Server.
|
|
|
|
Form Factor
|
Tower (4.5U)
NOTE: Sliding Shelf - 234672-B21 is optional to support rack form factor.
|
|
|
|
Embedded Management
|
|
HPE Integrated Lights-Out
(HPE iLO)
|
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Not available on ML10 Gen9. Learn more at http://www.hpe.com/info/ilo.
|
|
|
|
UEFI
|
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi.
|
|
|
|
RESTful API
|
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
|
|
|
|
Intelligent Provisioning
|
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.
|
|
|
|
Embedded Remote Support
|
The Hewlett Packard Enterprise embedded remote support, when used with Insight Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone home support. Learn more at http://www.hpe.com/info/insightonline/explore.
|
|
|
|
|
|
Server utilities
|
|
Smart Update
|
Optimize firmware and driver updates with Smart Update solutions including Smart Update Manager (SUM) and Service Pack for ProLiant (SPP) and smart components. Learn more at http://www.hpe.com/servers/smartupdatemanager.
|
|
|
|
HPE Systems Insight Manager (HPE SIM)
|
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/servers/hpsim.
|
|
|
|
Scripting Tool Kit and Windows PowerShell
|
Provision 1 to many servers using your own scripts to discover and deploy them with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/proliant/stkorhttp://www.hpe.com/servers/powershell.
|
|
|
|
RESTful Interface Tool
|
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4 to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
|
|
|
|
HPE iLO Mobile Application
|
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.
|
|
|
|
HPE Insight Online
|
HPE Insight Online, available at no additional cost as part of your Hewlett Packard Enterprise warranty, Care Pack or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hpe.com/info/insightonline/explore.
|
NOTE: The Service Pack for ProLiant (which includes HPE SUM) can be downloaded from http://www.hp.com/go/spp/download. More information can be found: http://www.hp.com/go/SmartUpdate, http://www.hp.com/go/spp and http://www.hp.com/go/hpsum.
|
|
|
|
|
Security
|
|
Power-on password
|
|
Setup password
|
|
Serial interface control
|
|
Power switch security
|
|
Administrator's password
|
|
TPM 1.2
|
|
TPM 2.0
|
|
UEFI
|
|
|
|
|
Warranty
|
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose t
|
|
