HPE ProLiant DL360 Gen11

Do you need to efficiently expand or refresh your IT infrastructure to propel the business? Adaptable for diverse workloads and environments, the compact 1U HPE ProLiant DL360 Gen11 delivers enhanced performance with the right balance of expandability and density. Designed for supreme versatility  and resiliency while backed by a comprehensive warranty, the HPE ProLiant DL360 Gen11 is ideal for IT infrastructure, either physical, virtual, or containerized.

The HPE ProLiant DL360 Gen11 supports the 4^th  Generation Intel® Xeon® Scalable Processors with up to 56 cores, plus 4800 MT/s HPE DDR5 SmartMemory up to 4.0 TB per socket. Introducing PCIe Gen5 and Intel® Software Guard Extensions (SGX) support on the dual-socket segment, the HPE ProLiant DL360 Gen11 complements Gen10 Plus reach by delivering premium compute, memory, networking communication, discrete graphic, I/O, and security capabilities for customers focused on performance at any cost. DL360 Gen11 server is an execellent choice of daily business and workloads in General Compute, Database Management, Virtual Desktop Infrastructure, Content Delivery Network, Edge Acceleration and Intelligent Video Analytics.

8 SFF Front View – 8 SFF + optional Universal Media Bay, optical drive, Display Port, USB2.0 and SAS drives shown

1.

Drive support label

8.

iLO Service port

2.

Quick removal access panel

9.

Power On/Standby button and system power LED

3.

Serial number/iLO information pull tab (optional - shown)

10.

Health LED

4.

Universal Media Bay (optional):

11.

NIC status LED

• Option: Optical drive bay + Display port & USB 2.0 port kit (shown)
• Option: 2 SFF 24G x4 Tri-Mode SAS/SATA/U.3 NVMe cage

12.

Unit ID button/LED

13.

USB 3.2 Gen1 port

14.

Drive bays; optional backplanes:

5

Display Port (optional – shown)

• Option: 8 SFF x1 24G Tri-Mode SAS/SATA/U.3 NVMe
• · Option: 8 SFF x4  24G Tri-Mode SAS/SATA/U.3 NVMe

6

Optical drive (optional – shown)

7

USB2.0 port (optional)

Notes: Optional- Systems Insight Display (SID) module is available for 8SFF CTO Server, and will be installed at the left-hand side of iLO Service port and USB 3.2 Gen1 port.

4 LFF Front View – 4 LFF + optional Optical drive, Display Port, USB2.0 and SAS drives shown

1.

Drive support label

7

iLO Service Port

2.

Optical drive (optional – shown)

8.

Power On/Standby button and system power LED

3.

Serial number/iLO information pull tab

9.

Health LED

4.

Quick removal access panel

10.

NIC status LED

5.

Option: Display port & USB 2.0 port bundle Kit (blank shown)

11.

Unit ID button/LED

6.

USB 3.2 Gen1 port

12.

SAS/SATA drive bays

Notes: Systems Insight Display (SID) module is not available in 4LFF CTO Server.

Internal View - Standard for all DL360 Gen11

1.

Liquid Cooling Module connector

13.

System Battry

2.

x8 SlimSAS ports (1A to 4A, 1B to 4B)

14.

Primary (CPU1) Riser PCIe 5.0

3.

DDR5 DIMM Slots (fully populated 32 DIMMs shown)

• 1x 16 FH and 1x16 LP slots

4.

Socket 2 MCIO ports (1 & 2)

15.

OCP Slot port

5.

Backplane Power connector

16.

Front Display Port and USB 2.0 connector (optional feature)

6.

Internal USB port (top USB 3.2 Gen1 and bottom USB 2.0)

17.

LP SlimSAS ports (1 & 2)

7.

Redudant Power Supply (1 & 2 as shown)

18.

Chipset

8.

Secondary (CPU 2) Riser PCIe 5.0

19.

Front I/O and USB 3.2 Gen1 connector

• Option: Low Profile x16
• Option: Full height x16 (lose Slot 2 on Primary Riser)

20.

SATA Optical port

21.

Socket 1 MCIO connector

9.

SID connector (optional feature, 8SFF only)

22.

CPU 1 (bottom) and CPU 2 (top) (shown with High Perfromance Heatsink)

10.

Energy Pack connector

23.

Hot plug (dual rotor) High Performance Fan Kit (7 fans)

11.

OCP Slot port

• Option: Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle Kit

12.

HPE NS204i-u NVMe Hot Plug Boot Optimized Storage Device (optional – shown)

24.

HPE Hybrid Capacitor or HPE Storage Battery holder

Rear View - Standard for all DL360 Gen11

1.

Slot 1 PCIe 5.0 – Full Height

6.

OCP 3.0 Slot 2: x16 PCIe 5.0^1,2 (Requires 2^nd Processor)

2.

Slot 2 PCIe 5.0 – Low Profile*

Notes: *Shown with optional hot-plugNS204i-u Boot Device

7.

Serial port (optional -  shown)

3.

Option: Slot 3 PCIe 5.0 (Requires 2^nd processor)

8.

iLO Management Port

• Low Profile and Full Height options

9.

USB 3.2 Gen1 Ports

4.

Redundant Power Supply (1 & 2 as shown)

10.

OCP 3.0 Slot 1: x16 PCIe 5.0²

5.

Video (VGA) port

Notes:

- ¹ Supports various NICs, up to 200GbE

- ² Or supports each slot with x8 PCIe 5.0 under one processor, with the selection of "P51911-B21, CPU1 to the "OCP2 x8 Enablement Kit".

What’s New

• All new DL360 Gen11 server
• New 4^th Generation Intel® Xeon® Scalable Processors
• New PCIe 5.0 support
• New HPE DDR5 SmartMemeory – Registered (RDIMM), 4800MT/s
• New HPE Gen11 Storage Controllers
• New HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
• New HPE Storage SSD and HDD support
• New HPE iLO6 support
• Nvidia A2 GPU support¹

Notes: ¹GPGPU can be configured, priced, and quoted. However, this server/GPGPU combination is not orderable until Q2 2023.

Platform Information

Form Factor

• 1U rack

Chassis Types

• 8 SFF drive bays: x1 24G SAS/SATA/U.3 NVMe or x4 24G SAS/SATA/U.3 NVMe

- With options for additional 2 SFF drive bays: x4 24G SAS/SATA/U.3 NVMe

- With options for additional optical drive, 1x USB3.2 Gen1 and 1x Display Port

• 4 LFF drive bays: x1 12G SAS/SATA

- With additional options for optical drive, 1x USB3.2 Gen1, and 1x Display Port

System Fans

• Choice of Standard Fan Kit (to be ordable in Q2 2023), Performnace Fan Kits and Closed-loop Liquid Cooling Heatsink Fan FIO Bundle Kit

Notes:

- Dual rotor hot plug Standard Fan kit (includes 5 fans) for processors below 185W TDP, to be orderable in Q2 2023.

- Dual rotor hot plug High Performance Fan Kit available (includes 7 fans), for one or two processors from 186W to 270W TDP

- The DL360 Gen11 will support up to 7 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown

- Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle Kit supports two processors go beyond 271W TDP

Processors – Up to 2 of the following, depending on model.

• The 2^nd digit of the processor model number "x4xx" is used to denote the processor generation (i.e. 4 = New 4^th Generation Intel® Xeon® Scalable Processors

Notes:

- All information provided here is subject to change without notice. Intel may make changes to specifications and product descriptions at any time, without notice. Please contact your Intel representative to obtain the latest Intel product specifications and roadmaps.

- For more information regarding Intel® Xeon® Scalable Processors, please see the following http://www.intel.com/xeon.

New 4^th Generation Intel® Xeon® Scalable Processors numbering convention

Workload

Notes:

- Covers the Intel public offering only.

- New Built-in Accelerators.

• 1 to 8 socket support
• Intel® Data Streaming Accelerator (DSA)
• Intel® Dynamic Load Balancer (DLB)
• Intel® Quick Assist Technology (QAT)
  • Intel® In-Memory Analytics Accelerator (IAA)

- Increased memory bandwidth with 8 channels DDR5, up to 4800 MT/s, 4.0TB maximum RAM per socket.

- Increased I/O bandwidth up to 80 PCIe 5.0 lanes per socket, and new Compute Express Link (CXL).

- Built-in AI Acceleration: Intel® Advanced Matrix Extension (AMX)

- Hardware-enhanced Security: Enhanced Intel® Software Guard Extensions (SGX) – with new cryptographic memory integrity

- Increaed Multi-Socket Bandwidth with new UPI2.0 (up to 16GT/s) with maximum 4 UPI Links

- New FlexBus I/O Interface PCIe5.0 + CXL

- ¹ The 4^th Generation Intel® Xeon® Scalable Processors are featured with Intel Speed Select Technology (SST) for Infrastructure as as Service, Networking and Virtualized environments worklaods. The SST includes,

• SST- Perfromace Profile
• SST- Base Frequency
• SST- Core Power
• SST- Turo Frequency

Default setting in ROM-Based Setp Utility (RBSU) as shown.

Notes:

- One or two processor(s) with TDP equal to or greater than 186W through 270W require High Performance Heatsink Kit (P48905-B21) and High Performance Fan Kit (P48908-B21)

- Two processors with TDP equal or greater than 271W require Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle Kit (P48906-B21)

- ¹Supports Intel® Speed Select Performance Profile (SST-PP), even though not being a "Y" processor.

- ² +: Feature Plus: Support AMX, DLB, DSA, IAA and QAT additionally

- Intel® Speed Select enabled processors: Platnium 8468V, 8460Y+, 8458P and 8452Y

Notes:

- ¹Single socket capable, no dual socket support

- One or two processor(s) with TDP equal to or greater than 186W through 270W require High Performance Heatsink Kit (P48905-B21) and High Performance Fan Kit (P48908-B21)

- Two processors with TDP equal or greater than 271W require Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle Kit (P48906-B21)

Chipset

Intel® C741 Chipset (Code Name: Product formerly Emmitsburg)

Notes: For more information regarding Intel® chipsets, please see the following URL: https://www.intel.com/content/www/us/en/products/chipsets/server-chipsets.html  

System Management Chipset

HPE iLO 6 ASIC

Notes: Read and learn more in the iLO QuickSpecs.

Memory

Notes:

- All processors support up to 4TB memory per socket.

- The maximum memory speed is limited by the processor selection.

- To realize the performance memory capabilities listed in this document, HPE DDR5 SmartMemory is required.

- For additional information, please visit the HPE Memory QuickSpecs and Technical White Papers or HPE DDR5 SmartMemory QuickSpecs.

Memory Protection

Advanced ECC

Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

Online Spare

Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.

Notes: For more information see our Memory RAS feature technical whitepaper.

PCIe Expansion Slots

Notes: The specifications above correspond with the default primary butterfly riser, which comes with CTO chassis

Notes:

- If Secondary riser is selected, then 2 Processor must be selected.

- If secondary FH riser is installed, then primary PCIe Slot #2 cannot be used, maximum 2 quantity of PCIe cards can be selected.

- If secondary FH riser is not selected, then maximum 1 quantity of FH PCIe cards can be selected.

- If secondary riser is not selected and "NS204i-u Rear Cbl Kit" is not selected, then maximum 2 quantity of PCIe cards can selected.

- If secondary riser is not selected and "NS204i-u Rear Cbl Kit" is selected, then maximum 1 quantity of PCIe cards can selected.

- If Secondary LP riser and "NS204i-u Rear Cbl Kit" are selected, then maximum 2 quantity of PCIe cards can selected.

- If Secondary LP riser is selected and "NS204i-u Rear Cbl Kit" is not selected, then maximum 3 quantity of PCIe cards can selected.

- All PCIe Slots support Wake-on-Lane (WoL) feature.

OCP Expansion Slots

Notes:

- ¹ OCP form factor internal controller.

- ² OCP Networking card.

- ³f only 1 OROC card is selected, by default connected from 8SFF backplane to OCP Slot1. And there is no controller cable can connect from 8SFF Backplane to OCP Slot 2.

- ⁴If 2 OROC cards are selected, by default the 8SFF controller cable is connected to OCP Slot1 (the comparably higher-end OROC card to be selected by default) and the 2SFF backplane is connected to OCP Slot2 with another OROC card selected (comparably less high-end one) with 2FF controller cable.

Internal Storage Devices

• Optical Drive

Available on 8 SFF and 4 LFF CTO Servers as an option (DVD-ROM or DVD-RW)

• Hard Drives

None ship standard

Storage Controllers

NVMe Boot Devices

• HPE NS204i-u NVMe Hot Plug Boot Optimized Storage Device (P48183-B21) ¹
• HPE ProLiant DL360 Gen11 NS204i-u Rear Cable Kit (P54702-B21)
• HPE ProLiant DL360 Gen11 NS204i-u Internal Cable Kit (P48920-B21)

Notes:

- ¹x4 PCIe Gen3.0 OS Boot device includes 2x 480GB M.2 NVMe SSDs, with preconfigured hardware RAID1.

- ²With removing the original PCIe Slot 2 cage and re-install the dedicated DL360 Gen11 NS204i-u cage, latch and cables in the P54702-B21. The NS204i-u will take up PCIe Slot 2 space only. The PCIe Slot 1 (FHHL) and PCIe Slot 3 (to be Low Profile) are available in the system with the selection of optional "HPE ProLiant DL360 Gen11 x16 LP Riser Kit (P48903-B21)".

- For additional information, please see the HPE OS Boot Device QuickSpecs

Essential RAID Controllers

• HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers

• HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller
• HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
• HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
• HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller
• HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller
• HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller^1,2

Notes:

- PE80xx NVMe drives are not supported.

- ¹Requires x16 physical and electrical riser slot.

- ²If second controller is required, must select secondary FH riserFor additional details, please see:

HPE Compute MR Gen11 Controllers QuickSpecs

HPE Compute SR Gen11 Controllers QuickSpecs

Maximum Storage

Graphics

Integrated video standard

• Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
• 16 MB Video Memory

HPE iLO 6 on system management memory

• 32 MB Flash
• 8 Gbit DDR4 with ECC protection

Power Supply

• HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes: Available in 94% and 96% efficiency.

• HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit

Notes:  Available in 96% efficiency.

• HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes:

- Available in 94% efficiency.

- 1600W Power supplies only support high line voltage (200 VAC to 240 VAC).

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please visit the HPE Power Advisor located at: HPE Power Advisor

For information on power specifications and technical content visit HPE Server power supplies.

Interfaces

Operating Systems and Virtualization Software

See HPE Servers Support & Certification Matrices

• Microsoft Windows Server
• VMware ESXi
• Red Hat Enterprise Linux (RHEL)
• SUSE Linux Enterprise Server (SLES)
• Canonical Ubuntu
• Oracle Linux and Oracle VM
• Citrix

Notes:

- For Windows Server and Microsoft Hyper-V Server, will be certified when shipment is available

- RHEL, SLES, Oracle Linux and Ubuntu will be certified at a later timeframe.

Industry Standard Compliance

• ACPI 6.4 Compliant
• PCIe 5.0 Compliant
• WOL Support
• Microsoft® Logo certifications
• PXE Support
• VGA
• Display Port

Notes: This support is on the optional Universal Media Bay.

• USB 3.2 Gen1 Compliant
• USB 2.0 Compliant (only on optional Universal Media Bay and embedded internal USB)
• Energy Star
• SMBIOS 3.4
• Redfish API
• IPMI 2.0
• Secure Digital 4.0
• Embedded TPM 2.0 support
• Advanced Encryption Standard (AES)
• Triple Data Encryption Standard (3DES)
• SNMP v3
• TLS 1.2
• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)
• Active Directory v1.0
• ASHRAE A3/A4

Notes:

- For additional technical, thermal details regarding ambient temperature, humidity, and feature support, please visit http://www.hpe.com/servers/ashrae

- At Standard Operating Support conditions, there is no time limitation for operating the servers in ASHRAE Class A2 conditions, unless otherwise specified in the applicable product information.

• EU Lot9

Notes: European Union (EU) eco-design regulations for server and storage products, known as Lot 9, establishes power thresholds for idle state, as well as efficiency and performance in active state which vary among configurations. HPE ProLiant Gen11 servers are compliant with Lot9 requirements.

Please visit: https://www.hpe.com/us/en/about/environment/msds-specs-more.html for more information regarding HPE Lot 9 conformance.

• UEFI (Unified Extensible Firmware Interface Forum) 2.7

Notes: UEFI is the default for the DL360 Gen11.

HPE Server UEFI

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen11 servers have a UEFI Class 2 implementation to support UEFI Mode.

Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as

• Secure Boot and Secure Start enable for enhanced security
• Embedded UEFI Shell
• Operating system specific functionality
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• Support for > 2.2 TB (using GPT) boot drives
• PXE boot support for IPv6 networks
• USB 3.0 Stack
• Workload Profiles for simple performance optimization

UEFI Boot Mode only

• TPM 2.0 Support
• iSCSI Software Initiator Support.
• NVMe Boot Support
• HTTP/HTTPs Boot support as a PXE alternative.
• Platform Trust Technology (PTT) can be enabled.
• Boot support for option cards that only support a UEFI option ROM

Notes: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.

HPE GreenLake for Compute Ops Management

HPE is intelligently transforming compute management with a completely new As a Service experience that delivers greater security, simplicity, and efficiency.  Discover a completely modernized compute management experience delivered through HPE GreenLake that securely streamlines operations from edge-to-cloud, and automates key lifecycle tasks (onboard, update, manage and monitor HPE servers), bringing the agility and greater efficiencies to wherever compute devices reside via a unified single browser-based interface. 

Compute Ops Management is built on a unique cloud-native architecture that abstracts, manages and controls HPE servers regardless of physical location. The management application resides in the HPE GreenLake cloud platform (access via https://console.greenlake.hpe.com) and leverages the HPE GreenLake architecture, security, and unified operations.

Each HPE ProLiant Gen11 rack, tower and micro server will include a 3-year subscription to HPE GreenLake for Compute Ops Management - Standard Tier. Upgrades to Standard Tier 5 Year term or to an Enhanced Tier, 3 or 5 Year term, subscription can be made at time of order.  Upgrades to Enhanced tier or OneView can also be made at any time.

For more information visit the HPE GreenLake Ops Management QuickSpecs:

https://www.hpe.com/psnow/doc/a50004263enw

Embedded Management

HPE Integrated Lights-Out (HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

Learn more at http://www.hpe.com/info/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).

Learn more at http://www.hpe.com/servers/uefi.

Intelligent Provisioning

Hassle free server and OS provisioning for one or more servers with Intelligent Provisioning.

Learn more at http://www.hpe.com/servers/intelligentprovisioning.

iLO RESTful API

iLO RESTful API is DMTF Redfish API information and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.

Server Utilities

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs.

Active Health System Viewer

Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv.

Smart Update

Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP).

Learn more at https://www.hpe.com/us/en/servers/smart-update.html.

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9, Gen10 and Gen10 Plus HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities.

Learn more at http://www.hpe.com/servers/iLOamplifierpack.

HPE iLO Mobile Application

Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell.

Learn more at http://www.hpe.com/servers/powershell.

HPE OneView Standard

HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview.

HPE Systems Insight Manager (HPE SIM)

Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim.

Security

• UEFI Secure Boot and Secure Start support
• Immutable Silicon Root of Trust
• FIPS 140-2 validation
• Common Criteria certification
• Configurable for PCI DSS compliance
• Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
• Support for Commercial National Security Algorithms (CNSA)
• iLO Security Modes
• Granular control over iLO interfaces
• Smart card (PIV/CAC) and Kerberos based 2-factor Authentication
• Tamper-free updates – components digitally signed and verified
• Secure Recovery – recover critical firmware to known good state on detection of compromised firmware
• Ability to rollback firmware
• Secure erase of NAND/User Data
• TPM 2.0 (Trusted Platform Module 2.0)
• Bezel Locking Kit option
• Chassis Intrusion detection option

HPE Trusted Platform Module

HPE Trusted Platform Module 2.0 is included on Pre-Configured models and can be enabled and disabled using the BIOS.

Notes: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates, and encryption keys.

Warranty

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:

https://www.hpe.com/us/en/search-results.html?page=1&q=servers%20warranty&autocomplete=0