 |
| MBD-X11SSL |
|
| |
|
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6" (24.38cm x 24.38cm)
|
| |
|
| CPU |
- Intel® 7th/6th Generation Core i3 series
- Intel® Celeron®
- Intel® Pentium®
- Intel® Xeon® Processor E3-1200 v6/v5 series
- Socket H4 (LGA 1151) supported; CPU TDP support 80W
|
| Note |
- BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
|
| |
|
| Memory Capacity |
- 64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
|
| Memory Type |
- 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- Intel® C232 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
| Network Controllers |
- Dual Intel® Ethernet Controller I210-AT
|
| Graphics |
|
| |
|
| USB |
- 6 USB 2.0 ports (2 rear, 4 via header(s))
- 5 USB 3.0 ports (2 rear, 2 via header(s), 1 Type A)
|
| Video Output |
|
| Serial Port / Header |
|
| TPM |
|
|
 |
|
| PCI-E |
- 1 PCI-E 3.0 x8 (in x16 slot)
- 1 PCI-E 3.0 x8
- 1 PCI-E 3.0 x4 (in x8 slot)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- APM 1.2
- DMI 2.3
- Hardware BIOS Virus protection
- PCI 2.3
- Plug and Play (PnP)
- RTC (Real Time Clock) Wakeup
- SMBIOS 2.7.1
- UEFI 2.3.1
- USB Keyboard support
|
| |
|
| Software |
- NMI
- SSM
- SuperDoctor® 5
- Watchdog
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
|
| FAN |
- 5x 4-pin fan headers (up to 5 fans)
- Fan speed control
- Overheat LED indication
- Thermal control tachometer fan connectors
|
| Temperature |
- CPU thermal trip support
- PECI
- Monitoring for CPU and chassis environment
- Thermal Monitor 2 (TM2) support
|
| LED |
- UID/Remote UID
- CPU / System Overheat LED
|
| Other Features |
- Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
- WOL
|
| |
|
| Operating Temperature Range |
- 0°C ~ 50°C (32°F ~ 122°F)
|
| Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
| Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|
SC813MFTQC-505CB
SC813MTQ-350CB
